Fujitsu PRIMEQUEST 1000 Series User Manual page 53

SVmco User Guide
2. Select [SVMCONIF] from the displayed list. Then, select [Properties]
from the right-click menu.
Notes
If there is no connection named [SVMCONIF], SVmco has
o
probably not been installed. Always change the settings after SVmco
installation.
Do not change the connection name [SVMCONIF]. Otherwise,
o
the settings can be overwritten by the automatically set values in a
SVmco update.
3. Select [Internet Protocol (TCP/IP)]. Then, click the [Properties] button.
>> The [Internet Protocol (TCP/IP) Properties] dialog box appears.
4. Set the IP address and subnet mask.
5. Set the PSA-to-MMB communication LAN IP addresses in the SVmco
configuration file.
File storage location : [SVmco installation
folder]\etc\fujitsu\SVmco\usr\ tommbipsetup.conf
Setting values: Enter the IP addresses set in Step 4.
<Setting example>
[NETWORK]
45