Configuring The Irmc S2/S3; Configuring The Lan Interface Of The Irmc S2/S3 - Fujitsu Remote Management User Manual

3

Configuring the iRMC S2/S3

The following tools are available for configuring the iRMC S2/S3:
– BIOS / TrustedCore / UEFI setup utility (see
– iRMC S2/S3 web interface (see
– Server Configuration Manager (see
This chapter provides you with information about the following topics:
– Configuring the LAN interface of the iRMC S2/S3 using the BIOS /
TrustedCore / UEFI setup utility (see
– Configuring text console redirection via LAN using the BIOS / TrustedCore /
UEFI setup utility (see
– Configuring the serial interface of the iRMC S2/S3 using the BIOS /
TrustedCore / UEFI setup utility (see
– Configuring the iRMC S2/S3 over the web interface (for an overview, see
page 63).
3.1 Configuring the LAN interface of the
iRMC S2/S3
This section describes:
– Requirements for configuring the LAN interface
– Configuring the LAN interface in the BIOS / TrustedCore
– Testing the LAN interface
I
"Spanning Tree" tree for the connection of the iRMC S2/S3 must be
deactivated (e.g. Port Fast=enabled; Fast Forwarding=enabled).
iRMC S2/S3
page 135)
page
page
page 48).
page
page 44)
347)
44).
57).
®
/ UEFI setup utility
41