Fujitsu PRIMEQUEST 1000 Series User Manual page 187

SVmco User Guide
５．４．１．Hot plugging an FC card incorporated
with the ETERNUS multipath driver
This section describes the hot plugging procedure for an FC card incorporated
with the ETERNUS multipath driver.
1. From the SVOM Web-UI, click [System Status] - [Driver Monitor] to
search for the FC card to be replaced.
You can search for the FC card to be replaced from the Unit names or
BUS numbers.
Suppose that you are going to replace IOB#0-PCIC#5. The red box
indicates the target device.
[Driver Monitor] window
179