Fujitsu PRIMEQUEST 1000 Series User Manual page 134

If the setting is no longer correct or is defective, delete the setting. Reexecute the
command.
The setting was completed
Meaning:
The setting was completed.
Corrective action:
No action is necessary.
(5) End status
0: Normal end
>0: Abnormal end
(6) Configuration procedure
Configure the interface for the management LAN before executing this
command.
1. Specify the IP address of the management LAN interface in the SVmco
configuration file (/etc/fujitsu/SVmco/usr/ipsetup.conf).
For details on setting the IP address of the management LAN interface,
see 2.1.5 Setting the management LAN IP
Configuration example/etc/fujitsu/SVmco/usr/ipsetup.conf
SVmco User Guidel
address.
126