Fujitsu PRIMEQUEST 1000 Series User Manual page 17

SVmco User Guide
<Communication settings>
Auto Negotiation off
Speed 100 Mbps
Duplex full
In the following cases, change the IP address setting.
1. IP address which was automatically set has the same IP address and
subnet address as a production network or management network.
2. You are configuring a new partition using a duplicate disk from another
partition.
3. The partition ID changes because a disk installed in a partition was
moved to another partition.
Change the IP address setting by using the following procedure. If you are
changing the setting because of the above reason 1, you need to change the IP
addresses of all partitions in the cabinet and the IP address of the PSA-to-MMB
communication LAN on the MMB side to IP addresses in the same subnet.
Change the IP addresses on the MMB side from the MMB Web-UI.
Notes

Do not change the automatically set communication values. Otherwise,
PSA-MMB communication may be disabled, making SVmco functions
unavailable.
9