Fujitsu PRIMEQUEST 1000 Series User Manual page 51

SVmco User Guide
Execute the PSA-to-MMB communication LAN setting command after
restarting the operating system.
2. Restart the operating system.
Performing the above procedure sets the following values.
<IP address>
172.30.0.<partition ID + 2>/24
Example: Partition ID of 2
172.30.0.4/24
<Communication settings>
Auto Negotiation off
Speed 100 Mbps
Duplex full
In the following cases, change the IP address setting.

The automatically set IP address is the same as the IP address or
subnet used for a production network or management network.

You are configuring a new partition using a duplicate disk from another
partition.
43