Fujitsu PRIMEQUEST 1000 Series User Manual page 217

SVmco User Guide

Confirming SELinux function settings

Checking the firewall function (opening ports)

Setting the destinations of traps from a partition

Configuring SNMP to use duplicate disks

Configuring SNMP to use duplicate disks

Confirming SELinux function settings
For details on how to confirm SELinux function settings, see
SELinux function settings.

Checking the firewall function (opening ports)
For the required firewall for the PSA-MMB communication LAN and the
management LAN, only a chain is automatically configured.
Since the settings related to PSA-MMB communication LAN interfaces are
essential, add the jump setting for the chain for PSA-MMB communication
(referred to below as the PSA-MMB_LAN chain) to INPUT and OUTPUT chains
in iptables manually. For the setting procedure, see PSA-to-MMB
communication LAN interfaces.
Also, the settings related to management LAN interfaces are required only for
PRIMECLUSTER linkage. For the setting procedure, see Management LAN
interfaces in 2.1.4 Checking the firewall function (opening
PSA-to-MMB communication LAN interfaces
The firewall settings vary depending on the environment. The settings shown in
the following procedure are an example of settings for PSA-to-MMB
communication.
2.1.3 Confirming
ports).
209