Fujitsu PRIMEQUEST 1000 Series User Manual page 366

SVmco User Guidel
Switching to a legacy interrupt occurred because initialization of the MSI
interrupt failed.
%s: ethx or xxxx.xx.xx.x
Corrective action:
Collect the data for investigation (dump or fjsnap). Ask your sales representative
or a field engineer to perform an investigation.
For a RHEL 5.3 Xen environment, no action is necessary. (Although this
message is output at operating system startup because the management
operating system does not support MSI, there is no effect on the system.)
Severity:
Warning
Action:
( / /T/S)
11624
e1000e:ethx Software error (Interrupt allocation failed)
Meaning:
Setting an interrupt failed.
Corrective action:
Collect the data for investigation (dump or fjsnap). Contact your sales
representative or a field engineer.
Severity:
Warning
358