Fujitsu PRIMEQUEST 1000 Series User Manual page 106

SVmco User Guidel
SVmco : W 02170 diskctrl Cannot stop HDD
Meaning:
The HDD could not be stopped from running.
Corrective action:
Check the hardware environment. Execute the command again.
If the problem persists even after you execute the command again, collect the
necessary maintenance information, contact your sales representative or a field
engineer.
SVmco : W 02171 diskctrl Cannot get device information(SCSI)
Meaning:
Device information could not be retrieved from the SCSI device.
Corrective action:
Check the hardware environment. Execute the command again.The following
causes are possible:
- The disk is configured only with RAID. (Disks in a RAID configuration are not
controlled by diskctrl.)
SVmco : W 02172 diskctrl Cannot get device information(Registry)
Meaning:
The device information cannot be acquired from the registry.
Corrective action:
Check the hardware environment. Execute the command again.
98