Fujitsu PRIMEQUEST 1000 Series User Manual page 442

Bus Reset on a target failed.
Corrective action:
A driver or system error (insufficient resources) occurred. If the error keeps
recurring, contact your sales representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
12089
lpfc:xxxx:xx:xx.x Adapter error (Adapter failed to mbxCmd CONFIG_HBQ)
vendor-id=10DF device-id=%d revision=%r
Meaning:
Adapter initialization failure: The CONFIG_HBQ mailbox command failed.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
A card or the card firmware has a fault. Contact your sales representative or a
field engineer.
Severity:
Warning
Action:
SVmco User Guidel
434