Setting A Libroot Folder - Fujitsu PFU Rack2-Filer User Manual

Chapter 6 Rack2-Filer Window Operations
6.1

Setting a LibRoot Folder

This section explains how to set the LibRoot folder so that libraries, cabinets
and binders can be saved.
Up to three LibRoot folders can be set.
1.
Select a LibRoot folder, click
84 |
Rack2-Filer User's Guide
By setting a network folder as a LibRoot folder, Rack2-Filer
data can be shared between multiple users.
However, operations are restricted for data that is being
accessed by another user. For details, refer to "2.2 Limitations
on Operations on Shared Data in the Network" (Page 43).
When a folder in the local computer is specified as a LibRoot
folder, the folder must be in the local hard disk drive or external
hard disk drive.
If a folder in removable disk drives such as USB flash drives or
MOs is specified as a LibRoot folder, Rack2-Filer may not
operate correctly.
The [Rack2-Filer Options] dialog box appears.
, and select [Options].