Fujitsu PRIMEQUEST 1000 Series User Manual page 630

The recognition of a device was interrupted because the device responded with
busy to an I/O request to recognize the device, even after retries.
%v: (Example) FUJITSU
%m: (Example) MAP3367NC
%ser: (Example) 01234567
Corrective action:
If the LUN where the error occurred is shared by multiple servers using FC-
Switch or other means, review the zoning setting to reduce the load on each
server. If a single drive is used, replace the drive.
Severity:
Warning
Action:
(R/M/T/S)
14111
scsi: Software error (barrier error; disabling flush support)
Meaning:
Ordered flush is not performed after this because it would fail.
Corrective action:
See the error messages displayed before this one, and take corrective action.
Severity:
SVmco User Guidel
622