Fujitsu PRIMEQUEST 1000 Series User Manual page 370

SVmco User Guidel
11630
e1000e:ethx Software error (Could not set PHY Host Wakeup bit)
Meaning:
Reading of the PHY Host Wakeup bit failed.
Corrective action:
Collect the data for investigation (dump or fjsnap). Contact your sales
representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
11631
e1000e:xxxx:xx:xx.x Software error (not support wake-up packets)
Meaning:
This interface does not support directed (unicast) frame wake-up packets.
Corrective action:
Check whether the card supports WOL. If it supports WOL, confirm that the
setting was made in the correct way.
Severity:
Warning
362