Fujitsu PRIMEQUEST 1000 Series User Manual page 35

SVmco User Guide
-v version:
This option specifies the SNMP version. For SNMPv3, specify 3.
-e engineID:
This option specifies the oldEngineID value. The /var/net-
snmp/snmpd.conf file at the trap source contains this value.
-u secName:
This is the account for SNMPv3. This setting must match that on the
manager side.
-l secLevel:
This option specifies one of the values listed in following table according
to the security level of SNMPv3 messages.
secLevel settings
Setting value
noAuthNoPriv
authNoPriv
Authentication
Not set Not set
Set Not set
Encryption
27