Fujitsu PRIMEQUEST 1000 Series User Manual page 190

y
Removing the card.....
The card has removed.
Please replace the card, and input "y" key.
y
Adding the card...............
The card has added.
C:\>
When "Please replace the card" appears, replace the FC card, and insert the
cable. After replacing the FC card, press the [y] key.
Remarks
The process may stop with the following message. This message is displayed
if an application is referencing the FC card or if the card was replaced soon
after the device went offline.
Check whether any application is referencing the FC card. If no application is
referencing the card, wait about 10 minutes and reexecute the command.
Depending on the configuration, it may take a much longer time to replace the
FC card.
SVmco User Guidel
182