Fujitsu PRIMEQUEST 1000 Series User Manual page 26


Using the shell script (setmlanfw.sh) for these settings
1. Confirm the completion of the operations described in
management LAN IP
Prepare a configuration file.
The following is a sample configuration file.
/opt/fujitsu/SVmco/sh/sample_conf_setmlanfw.txt
Remarks
A SVmco update will overwrite the above sample file. Save a copy of the
configuration file to retain the original values.
In the configuration file, write [PCL] only on the first line. Then, on separate lines,
write the physical IP addresses of the MMBs (MMB#0/MMB#1) belonging to all the
cluster nodes defined for PRIMECLUSTER, or write the network IP addresses
including the physical IP addresses of the aforementioned MMBs.
Sample configuration file:
[PCL]
192.168.0.0/24
192.168.1.5
2. Execute the shell script.
In the first variable, specify the path to the configuration file prepared in
step 2.
address.
SVmco User Guidel
2.1.8 Setting the
18