Handling An Incoming Call If You Announce Calls - AT&T SYSTEM 25 User Manual

Handling an Incoming Call If You
Announce Calls
You can use either the SLAC or the Selector Console to extend
calls. Before you extend a call, you can check with the called
party to see if he or she will take the call. While you are talking
with the called party, the caller is on hold and cannot hear you.
Your System 25 is set for either Automatic Release or Automatic
Hold. If your system is set for Automatic Release, when the
called party agrees to take the call, simply hang up or select
another (LOOP) instead of pressing (RELEASE). Check with your
System Administrator to see which feature you have.
If you want to extend an outside call to another outside line, see
the entry for "Transfer" on page 87.
Extending a Call Using the SLAC
1 Press (START) and listen for dial tone.
2 Dial the PDC.
3 If the called party answers and will take the call
4 Hang up.
22
call, press (RELEASE) .
or
If the called party is busy, does not answer,
or will not take the call, press (CANCEL) and
speak with the caller.
(Continued)