Display Ospfv3 Lsdb - 3Com S7906E Command Reference Manual

Transmit Delay is 1 sec, State: Waiting, Priority: 1
No designated router on this link
No backup designated router on this link
Timer interval configured
Hello: 10, Dead: 40, Poll: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:05
Neighbor Count is 0, Adjacent neighbor count is 0
Table 1-2 display ospfv3 interface command output description
Interface ID
IPv6 Prefixes
OSPFv3 Process
Area
Instance ID
Router ID
Network Type
Cost
Transmit Delay
State
Priority
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello: 10, Dead: 40,
Poll: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count
Adjacent neighbor count

display ospfv3 lsdb

Syntax
display ospfv3 [ process-id ] lsdb [ [ external | inter-prefix | inter-router | intra-prefix | link |
network | router ] [ link-state-id ] [ originate-router router-id ] | total ]
View
Any view
Default Level
1: Monitor level
Field
1-8
Description
Interface ID
IPv6 Prefix
OSPFv3 Process
Area ID
Instance ID
Router ID
Network type of the interface
Cost value of the interface
Transmission delay of the interface
Interface state
DR priority of the interface
No designated router on this link
No backup designated router on this link
Time intervals in seconds configured on the
interface, Hello: 10, Dead: 40, Poll: 40, Wait: 40,
Retransmit: 5
Hello packet will be sent in 2 seconds
Number of Neighbors on the interface
Number of Adjacencies on the interface