3Com S7906E Command Reference Manual page 878

View
Any view
Default Level
1: Monitor level
Parameters
group-name: Peer group name, a string of 1 to 47 characters.
Description
Use the display bgp group command to display peer group information.
Examples
# Display the information of the peer group aaa.
<Sysname> display bgp group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
2.2.2.1
Table 1-2 display bgp group command output description
BGP peer-group
Remote AS
type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Peer Preferred Value
V AS MsgRcvd MsgSent
4 200 0
Field
OutQ PrefRcv Up/Down
0 0 0 00:00:35 Active
Description
Name of the BGP peer group
AS number of peer group
Type of the BGP peer group: IBGP or EBGP
Maximum prefixes allowed to receive from the peer
group
Percentage of received prefixes from the peer group
to maximum prefixes allowed to receive from the peer
group; If the percentage is reached, the system
generates alarm messages.
Holdtime interval
Keepalive interval
Minimum interval for route advertisements
Preferred value specified for the routes from the peer
1-14
State