Import-Route (Ospfv3 View) - 3Com S7906E Command Reference Manual

Examples
# Filter received routes using the IPv6 prefix list abc.
<Sysname> system-view
[Sysname] ip ipv6-prefix abc permit 2002:1:: 64
[Sysname] ospfv3 1
[Sysname-ospfv3-1] filter-policy ipv6-prefix abc import

import-route (OSPFv3 view)

Syntax
import-route { isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ [ allow-ibgp ] | direct
| static } [ cost value | type type | route-policy route-policy-name ] *
undo import-route { isisv6 process-id | ospfv3 process-id | ripng process-id | bgp4+ | direct | static }
import-route protocol [ process-id | allow-ibgp ] [ cost cost | type type | route-policy
route-policy-name ] *
undo import-route protocol [ process-id ]
View
OSPFv3 view
Default Level
2: System level
Parameters
protocol: Redistributes routes from a specified routing protocol, which can be bgp4+, direct, isisv6,
ospf v3, ripng, or static.
process-id: Process ID of the routing protocol, in the range 1 to 65536. It defaults to 1. This argument
takes effect only when the protocol is isisv6, ospfv3, or ripng.
allow-ibgp: Allows redistributing iBGP routes. This keyword takes effect only the protocol is bgp4+.
cost cost: Specifies a cost for redistributed routes, ranging from 1 to 16777214. The default is 1.
type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.
route-policy route-policy-name: Specifies to redistribute only the routes that match the specified route
policy. route-policy-name is a string of 1 to 19 characters.
Using the import-route bgp4+ command redistributes only EBGP routes, while using the import-route
bgp4+ allow-ibgp command redistributes both EBGP and IBGP routes.
Description
Use the import-route command to redistribute routes.
Use the undo import-route command to disable routes redistribution.
1-25