Pci Option Modules; Figure 5-18 Removing And Replacing A Pci Option Module - Compaq ES40CSLP Installation, User & Service Manual

5.19 PCI Option Modules

___________________________ WARNING _________________________
For protection against fire, only modules with current limited output should
be used.
______________________________________________________________
___________________________ ACHTUNG _________________________
Zum Schutz gegen Feuer sollten nur Module mit begrenztem Ausgangsstrom
benutzt werden.
______________________________________________________________
Perform the following procedure to remove PCI option modules:
1. Extend the chassis for service (see Section 5.2).
2. Remove the PCI access cover (see Section 5.5).
3. Disconnect any internal or external cables that are connected to the PCI option module.
4. Remove the screw
5. Slide the PCI option module out of the slot (see Figure 5-18).
To replace the PCI option module, refer to Figure 5-18 and reverse steps 1 through 5 of the
removal procedure. Ensure that the jumpers on the new module are set to match the jumpers on
the module being replaced.

Figure 5-18 Removing and Replacing a PCI Option Module

c
that secures the PCI option module
Compaq ES40CSLP Rackmount System Installation/User/Service Guide 5–21
Removal and Replacement
š
in its slot (see Figure 5-18).
2
1
EA-00090