Table 5-1 Rfch Allowable Range And Preset Value - Agilent Technologies N9360A Programming Manual

5
Programming Command Reference

Table 5-1 RFCH Allowable Range and Preset Value

Int Allowable Range
1 –1 1
2 99999 9600 to 9900
5-40
TESTs:AUTO:VARiable:RFCH:CHANnel2 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel2?
TESTs:AUTO:VARiable:RFCH:CHANnel3 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel3?
TESTs:AUTO:VARiable:RFCH:CHANnel4 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel4?
TESTs:AUTO:VARiable:RFCH:CHANnel5 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel5?
TESTs:AUTO:VARiable:RFCH:CHANnel6 <<
<int 1>,<int 2>
TESTs:AUTO:VARiable:RFCH:CHANnel6?
These commands set a Band and a variable (uplink channel
number) for RFCH. The measurement on the RFCH is skipped if
these are set to
cannot be skipped.
The allowable range and preset values are as follows:
6
812|837|4150 to 4200
These query commands return the set Band and channel
number with integer. The range of the value is same as that of
the command.
, (— is shown in the table cell). RFCH1
-1 99999
is a band and
<int 1>
Preset Value
CH1 CH2 CH3
1 1 1
9612 9750 9888
N9360A Multi UE Tester W-CDMA Programming Manual
is a variable.
<int 2>
CH4 CH5 CH6
— — —
— — —