Agilent Technologies N9360A Programming Manual page 116

5
Programming Command Reference
5-70
• <real 3> (up to 6 letters) is the measured data ranging
from to
-999.9 +999.9
range or Frequency Error is not measured, the value
is returned.
EVM Measurement
TXANalyzer:RESults:EVM?
This query command returns the EVM measurement result
values, ,
<int 1> <int 2>
separated by a comma.
<int 1> (1 digit) is
0
measurement range, or
or EVM is not measured.
<int 2> (1 digit) is the test result for the pass (0) or fail (1).
<real 3> (up to 7 letters) is the measured data ranging from
to in %. If measurement result is out of range or
0.00 +100.00
EVM is not measured, the value +99.99 is returned.
Origin Offset Measurement
TXANalyzer:RESults:OriginOFFset?
This query command returns a set of test result values, <int
1>, <int 2>, and <real 3>.
• <int 1> (1 digit) is
measurement range, or
range or Origin Offset is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging
from to
-99.99 0.00
range or Origin Offset is not measured, the value
returned.
ACLR DSB 5MHz Measurement
TXANalyzer:RESults:ACLR5mhz?
This query command returns a set of test result values, <int
1>, <int 2>, and <real 3>.
N9360A Multi UE Tester W-CDMA Programming Manual
in Hz. If measurement result is out of
, and . Each value is
<real 3>
if measurement result is within the
if measurement range is out of range
1
if measurement result is within the
0
if measurement result is out of
1
in %. If measurement result is out of
+999.9
is
-99.99