Agilent Technologies N9360A Programming Manual page 90

5
Programming Command Reference
5-44
TESTs:AUTO:RESults:INNErpower4:DownMIN?
TESTs:AUTO:RESults:INNErpower5:DownMIN?
TESTs:AUTO:RESults:INNErpower6:DownMIN?
This query command returns the measurement Down MIN
result values, <int 1>, <int 2> and <real 3>, for each
channel.
• <int 1> (1 digit) is
measurement range, or
or the Inner Loop Power Down MIN is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging
from to
-99.99 +99.99
or the Inner Loop Power Down MIN is not measured, the
value is returned.
-99.99
Inner Loop Power Measurement (Down MAX)
TESTs:AUTO:RESults:INNErpower1:DownMAX?
TESTs:AUTO:RESults:INNErpower2:DownMAX?
TESTs:AUTO:RESults:INNErpower3:DownMAX?
TESTs:AUTO:RESults:INNErpower4:DownMAX?
TESTs:AUTO:RESults:INNErpower5:DownMAX?
TESTs:AUTO:RESults:INNErpower6:DownMAX?
This query command returns the measurement result values,
<int 1>, <int 2> and <real 3>, for each channel.
• <int 1> (1 digit) is
measurement range, or
underflow or not made.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging from
to
-99.99 +99.99
range or Inner Loop Power Down MIN is not measured, the
value is returned.
-99.99
Inner Loop Power Measurement (Up MIN)
TESTs:AUTO:RESults:INNErpower1:UpMIN?
N9360A Multi UE Tester W-CDMA Programming Manual
if measurement result is within the
0
if any measurement is out of range
1
in dB. If measurement is out of range
if measurement result is within the
0
if any measurement is overflow,
1
in dB. If measurement result is out of