Agilent Technologies N9360A Programming Manual page 69

N9360A Multi UE Tester W-CDMA Programming Manual
This command defines whether or not to include Sensitivity Bit
Error Rate (BER) tests in the test sequence. <int> is a sum of
the values of all the 6 bits as follows.
bit 0 (1): For testing RFCH1
bit 1 (2): For testing RFCH2
bit 2 (4): For testing RFCH3
bit 3 (8): For testing RFCH4
bit 4 (16): For testing RFCH5
bit 5 (32): For testing RFCH6
The choices for each bit are
preset, this is set to
63
This query command returns the setting of Sensitivity BER test
with integer. The meaning of the return value is same as that of
the command parameter.
RF Input Attenuation
CONFigure:SEQuence:LOSS:RFIN:CHANnel1 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel1?
CONFigure:SEQuence:LOSS:RFIN:CHANnel2 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel2?
CONFigure:SEQuence:LOSS:RFIN:CHANnel3 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
<real 5>,<real 6>
CONFigure:SEQuence:LOSS:RFIN:CHANnel3?
CONFigure:SEQuence:LOSS:RFIN:CHANnel4 <<
<real 1>,<real 2>,<real 3>,<real 4>,<<
Programming Command Reference
for Run and
1 0
.
5
for — (skip). At
5-23