Command Reference For File Management Screen - Agilent Technologies N9360A Programming Manual

5
Programming Command Reference
CONFigure:CONDition:TPCAlgorithm?
This command selects the TPC Algorithm from and . At
1 2
preset, this is set to .
1
This query command returns the set TPC Algorithm with
integer.

Command Reference for File Management Screen

The File commands are used to manage the test setup files on
the HDD in the Tester or USB memory device.
HDD: A Hard Disk Drive in the Tester
USB: A USB memory device inserted into the USB port on the
front panel or rear panel.
Save File
CONFigure:FILE:SAVE <string FILENAME>,<<
<string COMMENT>
This command saves the current settings of the Tester into the
HDD or USB memory device. FILENAME accepts up to 8
alphanumeric characters. COMMENT accepts up to 23
alphanumeric characters. Date and Time are automatically
given by the Tester. FILENAME and COMMENT are double
quoted strings.
Recall File
CONFigure:FILE:RECall <string FILENAME>
This command loads the test setup file specified by FILENAME
from the HDD or a USB memory device into the internal
memory of the Tester. FILENAME accepts up to 8 alphanumeric
characters. FILENAME is a double quoted string.
Delete File
CONFigure:FILE:DELete <string FILENAME>
N9360A Multi UE Tester W-CDMA Programming Manual 5-37