5
Programming Command Reference
5-68
This query command returns the setting of the TX Power
measurement with integer value of
return value is same as that of the command parameter.
Frequency Error
TXANalyzer:FREQuency:STATe ON|OFF|1|0
TXANalyzer:FREQuency:STATe?
This command sets whether or not to execute the Frequency
Error measurement. The parameter is
preset, this is set to
ON
This query command returns the setting of the Frequency Error
measurement with integer value of
return value is same as that of the command parameter.
EVM
TXANalyzer:EVM:STATe ON|OFF|1|0
TXANalyzer:EVM:STATe?
This command sets whether or not to execute the EVM
measurement. The parameter is
is set to
.
ON
This query command returns the setting of the EVM
measurement. The meaning of the return value is same as that
of the command parameter.
ACLR
TXANalyzer:ACLR:STATe ON|OFF|1|0
TXANalyzer:ACLR:STATe?
This command sets whether or not to execute the ACLR
measurement. The parameter is
is set to
. This command is valid only when the W07 option is
ON
installed in the Tester. If the W07 option is not installed in the
Tester, an execution error occurs.
This query command returns the setting of the ACLR
measurement. The meaning of the return value is same as that
of the command parameter.
N9360A Multi UE Tester W-CDMA Programming Manual
or
. The meaning of the
1
0
(1) or
ON
.
or
. The meaning of the
1
0
(1) or
ON
OFF
(1) or
ON
OFF
(0). At
OFF
(0). At preset, this
(0). At preset, this