Agilent Technologies N9360A Programming Manual page 82

5
Programming Command Reference
5-36
Connection Wait
CONFigure:CONDition:CONnectionwait <int>
CONFigure:CONDition:CONnectionwait?
This command sets the response time for MS Call connection.
The allowable range is from
this is set to (sec). When this is set to
0
immediately responds to the call.
This query command returns the set response time with integer.
The range of the value is same as that of the command
parameter.
Authentication Key
CONFigure:CONDition:AUTHKey:Type ORG|STD|USER
CONFigure:CONDition:AUTHKey:Type?
This command selects the type of Authentication Key among
, , and . At preset, this is set to
ORG STD USER
This query command returns the set type of Authentication Key
with string.
CONFigure:CONDition:AUTHKey:Key <string>
This command sets the Authentication Key when the type of
Authentication Key is set to
characters as hexadecimal string.
CONFigure:CONDition:AUTHKey:Key?
This query command returns the value of Authentication Key
with string. The preset value depends on the set Authentication
key Type.
• Authentication Key is set to ORG:
00112233445566778899AABBCCDDEEFF
• Authentication Key is set to STD:
000102030405060708090A0B0C0D0E0F
• Authentication Key is set to USER:
000102030405060708090A0B0C0D0E0F
Algorithm of power control
CONFigure:CONDition:TPCAlgorithm 1|2
N9360A Multi UE Tester W-CDMA Programming Manual
to (sec) in step. At preset,
0 120 1
, the Tester
0
.
ORG
. <string>: Fixed to 32
USER