Agilent Technologies N9360A Programming Manual page 81

N9360A Multi UE Tester W-CDMA Programming Manual
3GPP system
CONFigure:CONDition:3GPPsystem <int>
CONFigure:CONDition:3GPPsystem?
This command sets 3GPP system. The range is from
step. At preset, this is set to
This query command returns the set 3GPP system with integer.
The range of the value is same as that of the command
parameter.
Signaling Pattern
CONFigure:CONDition:SIGNalingpattern <int>
CONFigure:CONDition:SIGNalingpattern?
This command sets a signaling pattern. The allowable range is
from to in step. At preset, this is set to
1 255 1
This query command returns the set signaling pattern with
integer. The range of the value is same as that of the command
parameter.
Signaling Data
CONFigure:CONDition:DATa PN9|PN15
CONFigure:CONDition:DATa?
This command selects the signaling data from
preset, this is set to
PN9
This query command returns the set signaling data with enum.
Loopback Delay
CONFigure:CONDition:LDELay SHORT|MID|LONG
CONFigure:CONDition:LDELay?
This command selects the loopback delay among
and . At preset, this is set to
LONG
This query command returns the set loopback delay.
Programming Command Reference
.
1
.
.
MID
5
to in
1 3 1
.
1
and . At
PN9 PN15
, ,
SHORT MID
5-35