Agilent Technologies N9360A Programming Manual page 61

N9360A Multi UE Tester W-CDMA Programming Manual
This query command returns the date of the calendar in the
Tester by <int YYYY>, <int MM> and <int DD>. The range of
these values is same as that of the command parameter.
Time
CONFigure:TIME <int HH>,<int MM>
CONFigure:TIME?
This command sets the time of the clock in the Tester. <int
HH> is hour within the range from
minutes within the range from
This query command returns the time of the clock in the Tester
by <int HH> and <int MM>. The range of these values is same
as that of the command parameter.
Panel Key Control
CONFigure:PKEY UNLOCK|LOCK
CONFigure:PKEY?
This command sets the panel key control to UNLOCK or LOCK. At
preset, this is set to UNLOCK. If this is set to LOCK, only
Automatic Test and Configuration are available. However,
Manual Test, TX Analyzer and Signal Generator are all locked
and cannot be changed.
This command is not identical to Lock System Panel of the System
commands. See Lock System Panel
This query command returns the panel key control setting by
string of UNLOCK or LOCK.
Printer Control
CONFigure:PRINter PMG800|USBMemory
CONFigure:PRINter?
This command sets the output direction of the Print Screen. The
parameter is
PMG800
.
PMG800
This query command returns a type of printer or destination
with strings.
Programming Command Reference
to and <int MM> is
0 23
to .
0 59
on page
or . At preset, this is set to
USBMemory
5
5.
5-15