Agilent Technologies N9360A Programming Manual page 58

5
Programming Command Reference
5-12
Test Condition Screen
DISPlay:CONFigure:CONDition
This command selects the [Configuration : Test Condition]
screen. The parameters and controls on this screen set the test
conditions of Automatic Test and Manual Test.
Test Sequence Screen
DISPlay:CONFigure:SEQuence
This command selects the [Configuration : Test Sequence]
screen. The parameters and controls on this screen set the test
sequence of Automatic Test.
File Management Screen
DISPlay:CONFigure:FILE
This command selects the [File Management] screen. The files
containing test setup files for all function modes are saved to
the HDD or a USB memory device. Also, these files are recalled
or deleted from the HDD or the USB memory device.
N9360A Multi UE Tester W-CDMA Programming Manual