Agilent Technologies N9360A Programming Manual page 100

5
Programming Command Reference
5-54
BER Frames
TESTs:MANual:SENSitivity:FRAMe <int>
TESTs:MANual:SENSitivity:FRAMe?
This command sets the number of the frames for bit error ratio
(BER) tests and can be used in Stand-by or Connection status.
The allowable range is from
preset, this is set to
10
This query command returns the set number of the frames for
BER tests with integer.
OCNS
TESTs:MANual:OCNS ON|OFF|1|0
TESTs:MANual:OCNS?
This command sets whether or not to enable OCNS. The
parameter is (1) or
ON
(RMC) status. Also, this is reset to
becomes Stand-by.
This query command returns the setting of OCNS function with
the value or . The meaning of the value is same as that of the
1 0
command parameter.
Caller ID
TESTs:MANual:CALLer:ID <string>
TESTs:MANual:CALLer:ID?
This command sets the Caller ID on the [Stand-by] screen.
<string>: Sets dialing number at BS call(AMR) test step. Up to
20 digit arbitrary number (0 to 9) and symbol * or #. This is not
initialized by PRESET execution with the Starting Condition
softkey.
This query command returns the set Caller ID with string.
Averaging
TESTs:MANual:AVERage OFF|<int>
TESTs:MANual:AVERage?
N9360A Multi UE Tester W-CDMA Programming Manual
to (frames) in
1 4100
.
(0). This is valid in the Connection
OFF
(0) when the status
OFF
step. At
1