Tx Analyzer Subsystem; Command Reference For Stand-By / Measuring Screens - Agilent Technologies N9360A Programming Manual

TX Analyzer Subsystem

Command Reference for Stand-by / Measuring Screens

N9360A Multi UE Tester W-CDMA Programming Manual
• <int 2> specifies the data size up to 140.
• <String 3> sets the SMS-MT send message with up to 280
characters in the hexadecimal format.
This query command returns the SMS-MT send message (binary
data). If the setting of text data or binary data is not set to
binary data as this query command is executed, an execution
error occurs.
TESTs:MANual:SMSMt
This command starts SMS-MT.
SMS-MO
TESTs:MANual:SMS:RX?
This query command reads out a SMS-MO received message.
• <char 1> indicates the type of the data (ASC or BIN).
ASC indicates text data (ASCII), and BIN indicates binary
data.
• <int 2> indicates the value of the Coding Scheme.
• <int 3> indicates the data length.
When ASCII data is received, up to 160 characters are returned.
When Binary data is received, up to 140 bytes (represented by
280 characters in the hexadecimal format) are returned.
• <string 4> returns the received data. If ASCII data is
received, up to 160 characters are returned. If binary data is
received, up 280 characters are returned in the hexadecimal
format.
The following commands are used to set the controls and
parameters associated with the TX Analyzer mode.
Radio System
TXANalyzer:RFORmat W-CDMA
TXANalyzer:RFORmat?
Programming Command Reference
5
5-63