Agilent Technologies N9360A Programming Manual page 54

5
Programming Command Reference
5-8
CONFigure:ROSCillator?
This command sets the reference signal for use to INT for the
internal reference or EXT for the external reference signal. At
preset, this is set to INT.
This query command returns the reference signal setting with
string of INT or EXT.
When EXT is selected, an appropriate signal needs to be
supplied to the 10 MHz reference connector (IN) on the rear
panel of the Tester.
Date
CONFigure:DATE <int YYYY>,<int MM>,<int DD>
CONFigure:DATE?
This command sets the date of the calendar in the Tester. <int
YYYY> is year within the range from
month within the range from
within the range from
This query command returns the date of the calendar in the
Tester with <int YYYY>, <int MM> and <int DD>. The range
of these values is same as that of the command parameter.
Time
CONFigure:TIME <int HH>,<int MM>
CONFigure:TIME?
This command sets the time of the clock in the Tester. <int
HH> is hour within the range from
minutes within the range from
This query command returns the time of the clock in the Tester
with <int HH> and <int MM>. The range of these values is
same as that of the command parameter.
Autoboot
CONFigure:AUTOBoot NONE|GSM|WCDMA <int>
CONFigure:AUTOBoot?
N9360A Multi UE Tester W-CDMA Programming Manual
to
1990
to , and <int DD> is day
1 12
to .
1 31
to and <int MM> is
0 23
to .
0 59
, <int MM> is
2037