Table 7-5 Programming Comments - Agilent Technologies N9360A Programming Manual

Table 7-5 Programming Comments

Row Description
2: Declares the variable to store test results.
4: Erases the status field.
7: Queries the manufacturer, model number, serial number and revision number of the firmware.
8-11: Displays the manufacturer, model number, serial number and revision number of the firmware on the status field.
14: Resets the Tester to the default setting for programming.
15: Activates the Loss correction function.
16: Sets the Loss RF IN field.
17: Sets the Loss RF OUT field.
18: Sets the 3GPP System.
21: Sets the BS Call Type to RMC.
22: Sets the Band and RFCH.
23: Completes settings and waits until the [Manual] screen is displayed.
24: Directs a user: Turn on the mobile phone.
25: Wait until the signaling state is Location Update.
26: Directs a user: Wait until [Location Update] is passed.
27: Wait until [Location Update] is passed.
28: Executes the BS Call.
29: Wait until the signaling state becomes Connection (RMC).
32: Queries the measurement result of CPICH RSCP
33: Displays the measurement value and judgment result of CPICH RSCP in the status field.
36: Starts the Peak TX Power measurement.
37: Waits until the measurement is completed.
40: Queries the measurement result of Peak TX Power.
41: Displays the measurement value and judgment result of Peak TX Power in the status field.
N9360A Multi UE Tester W-CDMA Programming Manual
58
:
59
:' BS Release
60
: OUTPUT "TEST:MAN:BSR"
61
:
62
: AddStatus "Complete"
63
: End Sub
7
Sample Program
7-13