Table 4-3 Serial Port Configuration; Figure 4-3 [Configuration] Screen (Rs-232C Interface) - Agilent Technologies N9360A Programming Manual

4
Programming Command Guidelines

Table 4-3 Serial Port Configuration

Item
Baud Rate:
Data Length:
Stop bits:
Parity:
Xcontrol:
Terminator:
4-8
Preset
9600
8
1
None
None
CR+LF
The terminator outputted from the Tester can be change as
specified in Table
The terminator inputted to the Tester is LF (fixed).
Refer to the following procedure to set the serial port
configuration.
Step 1
On the [Initial] screen, press the Config softkey to obtain the
[Configuration] screen:

Figure 4-3 [Configuration] Screen (RS-232C Interface)

Other Choices
19200, 38400, 57600, 115200
7
1.5, 2
Odd, Even
Xon/Xoff
CR, LF
4-3.
N9360A Multi UE Tester W-CDMA Programming Manual