Agilent Technologies N9360A Programming Manual page 104

5
Programming Command Reference
5-58
The step in execution is set to
value in the parentheses is decimal value for each bit. Refer to
Setting and Querying the Registers
Call Status Clear
TESTs:MANual:SCLear
This command clears the pass or fail results of the Call Status.
Signaling Result
TESTs:MANual:RESults:SIGNaling?
This query command returns the Signaling results of Manual
Test. The returned value is a sum of the values of all the 10 bits
as follows, ranging from
bit 0(1): Location Update
bit 1(2): MS Call
bit 2(4): MS Release
bit 3(8): BS Call(AMR)
bit 4(16): BS Call(RMC)
bit 5(32): BS Release
bit 6(64): Connection(AMR)
bit 7(128): Connection(RMC)
bit 8(256): Handover
Each bit is set to if the test is pass, or each bit is set to
0
test is fail. The value in the parentheses is decimal value for
each bit. Refer to Setting and Querying the Registers
If there are no test results, all bits are set to
is returned.
is set if the test is pass, or
bit 0
there are no test results, the value
CPICH RSCP
N9360A Multi UE Tester W-CDMA Programming Manual
, and the others are set to
1
on page 14.
to .
0 511
1
is set if the test is fail. If
bit 1
is returned.
511
. The
0
if the
1
on page 14.
and the value
511