Agilent Technologies N9360A Programming Manual page 106

5
Programming Command Reference
5-60
Frequency Error Measurement
TESTs:MANual:RESults:FREQuency?
This query command returns the Frequency Error measurement
result values,
<int 1>
separated by a comma.
• (1 digit) is
<int 1>
measurement range, or
range or Frequency Error is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (up to 6 letters) is the measured data ranging from
<real 3>
to
-999.9 +999.9
range or Frequency Error is not measured, the value
is returned.
EVM Measurement
TESTs:MANual:RESults:EVM?
This query command returns the EVM measurement result values,
, , and
<int 1> <int 2>
comma.
• (1 digit) is
<int 1>
measurement range, or
range or EVM is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (up to 7 letters) is the measured data ranging from
<real 3>
to in %. If measurement result is out of range
0.00 -100.00
or EVM is not measured, the value
Origin Offset Measurement
TESTs:MANual:RESults:OriginOFFset?
This query command returns the Origin Offset measurement
result values,
<int 1>
separated by a comma.
• (1 digit) is
<int 1>
measurement range, or
range or Origin Offset is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
N9360A Multi UE Tester W-CDMA Programming Manual
, , and
<int 2> <real 3>
if measurement result is within the
0
if measurement result is out of
1
in Hz. If measurement result is out of
. Each value is separated by a
<real 3>
if measurement result is within the
0
if measurement result is out of
1
+99.99
, , and
<int 2> <real 3>
if measurement result is within the
0
if measurement result is out of
1
. Each value is
+999.9
is returned.
. Each value is