Agilent Technologies N9360A Programming Manual page 101

N9360A Multi UE Tester W-CDMA Programming Manual
This command sets whether to activate the averaging can be
used in Stand-by or Connection status. The parameter is
<int> for the number of averaging times. The allowable range
of <int> is from to
2
This query command returns the set averaging.
TX Power Test
TESTs:MANual:TXPower:STATe ON|OFF|1|0
TESTs:MANual:TXPower:STATe?
This command sets whether to execute the Peak TX Power test.
The parameter is (1) or
ON
This query command returns the setting of the TX Power test
with integer value of
same as that of the command parameter.
Frequency Test
TESTs:MANual:FREQuency:STATe ON|OFF|1|0
TESTs:MANual:FREQuency:STATe?
This command sets whether to execute the Frequency test. The
parameter is (1) or
ON
This query command returns the setting of the Frequency test
with integer value of
same as that of the command parameter.
EVM Test
TESTs:MANual:EVM:STATe ON|OFF|1|0
TESTs:MANual:EVM:STATe?
This command sets whether or not to execute EVM test. The
parameter is (1) or
ON
This query command returns the setting of the EVM test with
integer value of or
1 0
as that of the command parameter.
Programming Command Reference
. At preset, this is set to
99
(0). At preset, this is set to
OFF
or . The meaning of the return value is
1 0
(0). At preset, this is set to
OFF
or . The meaning of the return value is
1 0
(0). At preset, this is set to
OFF
. The meaning of the return value is same
5
or
OFF
.
OFF
.
ON
.
ON
.
ON
5-55