Agilent Technologies N9360A Programming Manual page 78

5
Programming Command Reference
5-32
Max TX Power
CONFigure:CONDition:LIMit:TXPower <<
<real LO>,<real HI>
CONFigure:CONDition:LIMit:TXPower?
This command sets the low and high limits for the test in each
band set by the Band
allowable range is
-99.99
preset, this is set to
+19.00
This query command returns the set low and high limits of Max
TX Power Test with real separated by a comma. The range of the
value is same as that of the command parameter.
Frequency Error Limit
CONFigure:CONDition:LIMit:FREQuency <<
<real LO>,<real HI>
CONFigure:CONDition:LIMit:FREQuency?
This command sets the low and high limits for Frequency Error
Test in each band set by the
page 28. The allowable range and preset values are as follows,
with allowable ranges variable in
Table 5-2
Band Allowable Range (Hz)
1 –999.9 to +999.9
6 –999.9 to +999.9
This query command returns the set low and high limits of
Frequency Error Tests with real separated by a comma. The
range of the value is same as that of the command parameter.
EVM
CONFigure:CONDition:LIMit:EVM <real HI>
CONFigure:CONDition:LIMit:EVM?
N9360A Multi UE Tester W-CDMA Programming Manual
command described on
to (dB) in
+99.99
(dBm) and
+26.00
Band command described on
steps.
0.1
–200.0
–90.0
page 28. The
steps. At
0.01
(dBm).
Preset (Hz)
<LO> <HI>
+200.0
+90.0