General; When Operating The Tester - Agilent Technologies N9360A Programming Manual

General

WARNING
WARNING

When Operating The Tester

CAUTION
CAUTION
N9360A Multi UE Tester W-CDMA Programming Manual
The protection provided by the N9360A system may be impaired if
the tester is used in a manner not specified by Agilent or the
instructions on the display are not followed.
DO NOT INSTRUMENT COVERS. Operating personnel must not
remove any instrument covers. Component replacement and
internal adjustments must be made only by qualified service
personnel. Products that appear damaged or defective should be
made inoperative and secured against unintended operation until
they can be repaired by a qualified service personnel.
Make sure that the input signal level does not exceed the maximum level
allowed. Tester failure may result otherwise.
Do not turn off the Line switch on the rear panel of the Tester while the
LINE LED on the front panel of the Tester is lit in green. Otherwise, Tester
failure may occur.
Caution and Safety Requirements
2
2-3