Agilent Technologies N9360A Programming Manual page 73

N9360A Multi UE Tester W-CDMA Programming Manual
This query command returns the setting of BS Call (AMR) with
integer value of or
1 0
as that of the command parameter.
Talk Test (AMR)
CONFigure:SEQuence:SIGNaling:TALK:AMR ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:TALK:AMR?
This command sets whether or not to include the Talk step with
an AMR connection (BS Call) in a test flow. The parameter is
(1) for Run or (0) for — (skip). At preset, this is set to
OFF
This query command returns the setting of Talk test with
integer value of or
1 0
as that of the command parameter.
BS Call (RMC)
CONFigure:SEQuence:SIGNaling:BSCAll:<<
RMC ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:BSCAll:RMC?
This command sets whether or not to include the BS Call (RMC)
in a test flow. The parameter is
(skip). At preset, this is set to
This query command returns the setting of BS Call (RMC) with
integer value of or
1 0
as that of the command parameter.
RF Test
CONFigure:SEQuence:SIGNaling:RFTEST ON|OFF|1|0
CONFigure:SEQuence:SIGNaling:RFTEST?
This command defines whether or not to include the RF Test
step in a test flow. The parameter is
— (skip). At preset, this is set to
This query command returns the setting of RF test with integer
value of or . The meaning of the return value is same as that
1 2
of the command parameter.
Programming Command Reference
. The meaning of the return value is same
. The meaning of the return value is same
(1) for Run or
ON
.
1
. The meaning of the return value is same
(1) for Run or
ON
.
1
5
ON
.
1
(0) for —
OFF
(0) for
OFF
5-27