Agilent Technologies N9360A Programming Manual page 91

N9360A Multi UE Tester W-CDMA Programming Manual
TESTs:AUTO:RESults:INNErpower2:UpMIN?
TESTs:AUTO:RESults:INNErpower3:UpMIN?
TESTs:AUTO:RESults:INNErpower4:UpMIN?
TESTs:AUTO:RESults:INNErpower5:UpMIN?
TESTs:AUTO:RESults:INNErpower6:UpMIN?
This query command returns the measurement result values,
<int 1>, <int 2> and <real 3>, for each channel.
• <int 1> (1 digit) is
measurement range, or
range or Inner Loop Power Up MIN is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging
from to
-99.99 +99.99
or Inner Loop Power is not measured, the value
returned.
Inner Loop Power Measurement (Up MAX)
TESTs:AUTO:RESults:INNErpower1:UpMAX?
TESTs:AUTO:RESults:INNErpower2:UpMAX?
TESTs:AUTO:RESults:INNErpower3:UpMAX?
TESTs:AUTO:RESults:INNErpower4:UpMAX?
TESTs:AUTO:RESults:INNErpower5:UpMAX?
TESTs:AUTO:RESults:INNErpower6:UpMAX?
This query command returns the measurement result values,
, and
<int 1> <int 2>
• <int 1> (1 digit) is
measurement range, or
range or Inner Loop Power Up MAX is not measured.
• <int 2> (1 digit) is the test result for the pass (0) or fail (1).
• <real 3> (up to 6 letters) is the measured data ranging
from to
-99.99 +99.99
range or Inner Loop Power Up MAX is not measured, the
value is returned.
-99.99
Programming Command Reference
if measurement result is within the
0
if measurement result is out of
1
in dB. If measurement is out of range
, for each channel.
<real 3>
if measurement result is within the
0
if measurement result is out of
1
in dB. If measurement result is out of
5
is
-99.99
5-45