Agilent Technologies N9360A Programming Manual page 98

5
Programming Command Reference
5-52
At start up of the Tester, the queries in
format are returned.
If the setting with
<int>
query changes to
<int>
If the setting with
<int 1>
the format of the query returns to
This query command returns the set Band and Frequency of
RFCH with real. The range of the value is same as that of the
command parameter.
BS Level
TESTs:MANual:AMPLitude <real>
TESTs:MANual:AMPLitude?
This command sets the amplitude (BS Level) of output signal
from the Tester. The allowable range is from
(dBm) in step. At preset, this is set to
0.1
This query command returns the set amplitude of output signal
with real. The range of the value is same as that of the command
parameter.
BS Call Type
TESTs:MANual:BSCType AMR|RMC
TESTs:MANual:BSCType?
This command selects a type of BS Call from
preset, this is set to
AMR
This query command returns the set BS Call type.
Power Control Level
TESTs:MANual:PLEVel CNTUP|CNTDOWN|HOLD <<
<char>,<int>
This command sets the output level of the mobile phone with
Power Control (TPC) in the Stand-by status. The Power Control
is valid during the Connection status. The allowable range and
preset values are as follows:
N9360A Multi UE Tester W-CDMA Programming Manual
<int 1>
format is performed, the format of the
format.
and format is performed,
<int 2>
and <int 2> format.
<int 1>
-110.0
-50.0
.
and
<int 2>
to
-50.0
(dBm).
and . At
AMR RMC