Agilent Technologies N9360A Programming Manual page 79

N9360A Multi UE Tester W-CDMA Programming Manual
This command specifies the high limit for EVM Test in each
band set by the Band
allowable range is from
preset, this is set to
17.50
This query command returns the set high limit of EVM Test with
real. The range of the value is same as that of the command
parameter.
Origin Offset
CONFigure:CONDition:LIMit:OriginOFFset <real HI>
CONFigure:CONDition:LIMit:OriginOFFset?
This command sets the high limit for Origin Offset Test in each
band set by the Band
allowable range is from
preset, this is set to
-32.00
This query command returns the set high limit of Origin Offset
Test with real. The range of the value is same as that of the
command parameter.
BER
CONFigure:CONDition:LIMit:BER <real HI>
CONFigure:CONDition:LIMit:BER?
This command sets the high limit for BER Test in each band set
by the Band command described on
range is from to
0.00
set to (%).
1.00
This query command returns the set high limit of BER Test with
real. The range of the value is same as that of the command
parameter.
ACLR DSB 5MHz
CONFigure:CONDition:LIMit:ACLR5mhz <real HI>
CONFigure:CONDition:LIMit:ACLR5mhz?
Programming Command Reference
command described on
to (%) in
0.00 99.99
(%).
command described on
to (%) in
-99.99 0.00
(dB).
page 28. The allowable
(%) in steps. At preset, this is
99.99 0.01
5
page 28. The
steps. At
0.01
page 28. The
steps. At
0.01
5-33