Agilent Technologies N9360A Programming Manual page 76

5
Programming Command Reference
5-30
This command sets the low and high limits for Inner Loop
Power:DownMin Test in each band set by the
described on page 28. The allowable range is from
(dB) in steps. At preset, this is set to
+99.99 0.01
and (dB).
0.00
This query command returns the set low and high limits of
Inner Loop Power:DownMin Test with real separated by a
comma. The range of the value is same as that of the command
parameter.
Inner Loop Power (DownMax)
CONFigure:CONDition:LIMit:INNErpower:<<
DownMAX <real LO>,<real HI>
CONFigure:CONDition:LIMit:INNErpower:DownMAX?
This command sets the low and high limits for Inner Loop
Power:DownMax Test in each band set by the
described on page 28. The allowable range is from
(dB) in steps. At preset, this is set to
+99.99 0.01
and (dB).
0.00
This query command returns the set low and high limits of the
test with real separated by a comma. The range of the value is
same as that of the command parameter.
Inner Loop Power (UpMin)
CONFigure:CONDition:LIMit:INNErpower:<<
UpMIN <real LO>,<real HI>
CONFigure:CONDition:LIMit:INNErpower:UpMIN?
This command sets the low and high limits for the test in each
band set by the Band
allowable range is from
preset, this is set to
0.00
This query command returns the set low and high limits of the
test with real separated by a comma. The range of the value is
same as that of the command parameter.
N9360A Multi UE Tester W-CDMA Programming Manual
command described on
to (dB) in
-99.99 +99.99
(dB) and (dB).
+2.00
Band command
to
-99.99
(dB)
-2.00
Band command
to
-99.99
(dB)
-2.00
page 28. The
steps. At
0.01