Agilent Technologies N9360A Programming Manual page 94

5
Programming Command Reference
5-48
• (1 digit) is
<int 1>
measurement range, or
range or Frequency Error is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (up to 6 letters) is the measured data ranging from
<real 3>
to
-999.9 +999.9
range or Frequency Error is not measured, the value
is returned.
EVM Measurement
TESTs:AUTO:RESults:EVM1?
TESTs:AUTO:RESults:EVM2?
TESTs:AUTO:RESults:EVM3?
TESTs:AUTO:RESults:EVM4?
TESTs:AUTO:RESults:EVM5?
TESTs:AUTO:RESults:EVM6?
This query command returns the EVM measurement result
values, ,
<int 1> <int 2>
• (1 digit) is
<int 1>
measurement range, or
range or EVM is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (up to 7 letters) is the measured data ranging from
<real 3>
to in %. If measurement result is out of range
0.00 -100.00
or EVM is not measured, the value
Sensitivity / BER Measurement
TESTs:AUTO:RESults:SENSitivity:BER1?
TESTs:AUTO:RESults:SENSitivity:BER2?
TESTs:AUTO:RESults:SENSitivity:BER3?
TESTs:AUTO:RESults:SENSitivity:BER4?
TESTs:AUTO:RESults:SENSitivity:BER5?
TESTs:AUTO:RESults:SENSitivity:BER6?
N9360A Multi UE Tester W-CDMA Programming Manual
if measurement result is within the
0
if measurement result is out of
1
in Hz. If measurement result is out of
and for each channel.
<real 3>
if measurement result is within the
0
if measurement result is out of
1
+99.99
+999.9
is returned.