6
Programming Command Summary
Manual Test Screens
Stand-by Screens
Table 6-11 Command Cross Reference for [Stand-by] Screen
Item
Radio System
RFCH
Frequency
BS Level
BS Call Type
Power Control Level
OCNS
BER Frames
Caller ID
Averaging
TX Power
Frequency Error
EVM
6-14
The following commands are used to set the controls and
parameters associated with the [Stand-by] screen, and to define
whether or not to execute each of measurement items.
Command
TEST:MAN:RFOR W-CDMA
TEST:MAN:RFOR?
TEST:MAN:RFCH:CHAN <int >
TEST:MAN:RFCH:CHAN <int 1>,<int 2>
TEST:MAN:RFCH:CHAN?
TEST:MAN:RFCH:FREQ <real>
TEST:MAN:RFCH:FREQ <int 1>,<real 2>
TEST:MAN:RFCH:FREQ?
TEST:MAN:AMPL <real>
TEST:MAN:AMPL?
TEST:MAN:BSCT AMR|RMC
TEST:MAN:BSCT?
TEST:MAN:PLEV CONTUP|CONTDOWN|HOLD <int>
TEST:MAN:PLEV?
TEST:MAN:OCNS ON|OFF|1|0
TEST:MAN:OCNS?
TEST:MAN:SENS:FRAM <int>
TEST:MAN:SENS:FRAM?
TEST:MAN:CALL:ID:SEND ON|OFF|1|0
TEST:MAN:CALL:ID:SEND?
TEST:MAN:AVER OFF|<int>
TEST:MAN:AVER?
TEST:MAN:TXP:STAT ON|OFF|1|0
TEST:MAN:TXP:STAT?
TEST:MAN:FREQ:STAT ON|OFF|1|0
TEST:MAN:FREQ:STAT?
TEST:MAN:EVM:STAT ON|OFF|1|0
TEST:MAN:EVM:STAT?
N9360A Multi UE Tester W-CDMA Programming Manual