Command Reference For Manual Test Result - Agilent Technologies N9360A Programming Manual

Command Reference for Manual Test Result

N9360A Multi UE Tester W-CDMA Programming Manual
TESTs:MANual:CPichRScp:MEASure
This command starts CPICH RSCP measurement in Connection
status.
The following query commands return measurement result values
of the Manual Test.
PRACH Power Measurement
TESTs:MANual:RESults:PRACHpower?
This query command returns the PRACH Power measurement
result values,
<int 1>
separated by a comma.
• (1 digit) is
<int 1>
measurement range, or
range or PRACH Power is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (up to 5 letters) is the measured data ranging from
<real 3>
to in dBm. If measurement result is out of range
-99.9 +99.9
or the PRACH Power is not measured, the value
returned.
TX Power Measurement
TESTs:MANual:RESults:TXPower?
This query command returns the TX Power measurement result
values, ,
<int 1> <int 2>
by a comma.
• (1 digit) is
<int 1>
measurement range, or
range or the TX Power is not measured.
• (1 digit) is the test result for the pass (0) or fail (1).
<int 2>
• (5 letters) is the measured data ranging from
<real 3>
to dBm. If any measurement is overflow,
-99.9 +99.9
underflow or not made, the value
Programming Command Reference
, , and
<int 2> <real 3>
if measurement result is within the
0
if measurement result is out of
1
, and . Each value is separated
<real 3>
if measurement result is within the
0
if measurement result is out of
1
-99.9
5
. Each value is
is
-99.9
is returned.
5-59