Mitsubishi Electric MELSEC iQ-R Series User Manual page 533

[Cd.30] Simultaneous starting own axis start data No.
Use this data item to specify a start data No. of own axis at multiple axes simultaneous starting.
Fetch cycle: At start
■Setting range
• Set with a decimal.
Setting range of [Cd.30]
1 to 600
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 402 Axis control data
■Default value
Set to "0".
[Cd.31] Simultaneous starting axis start data No.1
Use this data item to specify a start data No.1 for each axis that starts simultaneously.
Fetch cycle: At start
■Setting range
• Set with a decimal.
Setting range of [Cd.31]
1 to 600
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 402 Axis control data
■Default value
Set to "0".
[Cd.32] Simultaneous starting axis start data No.2
Use this data item to specify a start data No.2 for each axis that starts simultaneously.
For 2 axis simultaneous starting, the axis setting is not required. (Setting value is ignored.)
Fetch cycle: At start
■Setting range
• Set with a decimal.
Setting range of [Cd.32]
1 to 600
■Buffer memory address
Refer to the following for the buffer memory address in this area.
Page 402 Axis control data
■Default value
Set to "0".
Downloaded from ManualsNet.com search engine
12 DATA USED FOR POSITIONING CONTROL
12.8 Control Data
12
531